A gin pole is the temporary lifting mast a line crew uses to raise tower steel and set poles. It stands against the tower being built, held upright by guy ropes, with a pulley at the head and a winch or hoist pulling the load line. Choosing the wrong one is an expensive mistake: a pole that is too short cannot reach the lift point, and a pole that is too light for the load is a safety risk.
This guide explains the three decisions that matter most — construction type, length, and load capacity — using the gin poles listed on Huailite Power as examples. Every number below comes from the parameter tables on the product pages; prices are quoted per customer and project, not listed online.
Short answer
Choose the pole by length first, then check the allowable load at that exact length — the load falls as the length rises. If the rating is short, step up a cross-section or to a B version: the LBR400-12A is rated 85 kN and the LBR400-12B 129 kN at the same 12 m length. The safety factor printed in the tables is 2.5.
Lattice vs tubular
Most gin poles are one of two designs: lattice poles are built from four angle members laced together into an open square frame. The open frame keeps weight down for a given length, breaks into sections for transport, and lets wind pass through instead of pushing against a solid surface. The gin poles listed on Huailite Power are lattice poles: the main material is high-strength angle aluminum alloy, with galvanized steel parts. Tubular gin poles are a single tube, usually in sections — a common alternative on some projects, but not part of the range currently listed on this site. If your specification calls for a tubular pole, please ask us to confirm availability.
The lattice range we list comes in three series: LBNX aluminum alloy lattice gin poles, LBD lattice single gin poles and LBR lattice single gin poles.
Start with height — then check the load
Pick the length first: the pole must reach above the landing point, with height to spare for the pulley, the rigging and a safe guy-rope angle. Check the tallest lift on the job, not the average one.
Then comes the trade-off every buyer should understand: in every series, the allowable load falls as the length rises. The LBNX250-9 is rated at 29 at length 9, but the LBNX250-15 at 10; the LBR250-8 is rated at 72 kN at 8 m, but the LBR250-13 at 27 kN at 13 m.
So buying the longest pole “just in case” is the wrong instinct: a longer pole at the same cross-section is a weaker pole. If the load at your required length is too low, step up a cross-section instead: at length 11 in the LBNX table, the □250 model is rated at 19, the □300 at 29 and the □350 at 40.
How to read the load table
Each product page carries a full table of every model in the series — length, allowable load, cross-section and weight. Three things in those tables deserve attention:
1. Axial load and vertical load are different printed ratings. The LBNX and LBD tables list an allowable axial load; the LBR table lists an allowable vertical load in kN and adds a base stroke column (2.8 m on the 8 m models, rising to 7.6 m on the 22 m models). Read the rating that matches your erection method. If you are unsure which one governs your lift, ask us before ordering — do not compare a number from one table against a number from the other as if they were the same thing.
2. The A and B versions are not the same pole. Both share the same length and cross-section, but the B version is the heavier-duty build, with a higher allowable load and a higher weight. For example, the LBNX500-17A is rated at 57 against 88 for the LBNX500-17B, and the LBR400-12A at 85 kN against 129 kN for the LBR400-12B. If your heaviest lift sits above the A rating, the B version at the same length is the step up.
3. Single pulley vs double pulley. The LBNX table notes whether each model is single pulley or double pulley — the □250 models are single pulley, while the larger sections and the B versions are generally double pulley. A double-pulley head is part of why the heavier models carry more, so match it to the rigging your crew plans to use. The LBNX table also notes 2 sets of waist loop on the listed models.
The gin poles page lists a safety factor of 2.5. Treat the table value as the limit for the stated length: if your load falls between two models, step up a section or a version, or ask us to confirm the right model.
Weight, transport and handling
Weight is a working condition, not a footnote: the pole is carried to site, assembled by hand and moved from tower to tower. In the tables, the □250 models are listed at 10.5, rising to 24 for the □600 B models (the LBR table prints weight in kg/m). Aluminum alloy keeps each section light for its size, but a □600 pole is still a substantially heavier lift for the crew than a □250 one, and the longer models need more transport length and guying space at the tower base.
What to send us for a quote
Gin poles are quoted per customer and project. To get an accurate quote, send us the height of the highest lift, the heaviest single piece, and the length, cross-section or model number you have in mind — for example LBNX500-14A, LBD400-12B or LBR600-15B — or ask us to select from the table, plus quantity, delivery country and site, and any project specification. Send it to sales@staging.huailitepower.com, or use the contact form, or WhatsApp +86 13049969968. If the table does not cover your case, say so rather than guessing — we will confirm the model before quoting.
| Model | Length | Allowable vertical load | Cross-section |
|---|---|---|---|
| LBR250-8 | 8 m | 72 kN | □250 |
| LBR250-13 | 13 m | 27 kN | □250 |
| LBR400-12A | 12 m | 85 kN | □400 |
| LBR400-12B | 12 m | 129 kN | □400 |
| LBR500-13B | 13 m | 256 kN | □500 |
| LBR500-20B | 20 m | 127 kN | □500 |
FAQ
Can one gin pole cover several tower heights?
Within limits, yes — a pole is rated at each length, and the allowable load is higher at shorter lengths, so a pole bought for your tallest tower can also serve shorter ones. But check the load at the longest length you will actually use; if it is too low, a larger cross-section or a second pole is the safer choice.
What is the difference between the A and B versions of the same model?
Same length, same cross-section, different duty: the B version is built heavier and carries a higher allowable load — LBR400-12A is rated at 85 kN, LBR400-12B at 129 kN — and weighs more. Choose A when its rating covers your heaviest lift with margin; choose B when it does not.
Do you show prices for gin poles online?
No. All products are B2B and quoted per customer and project, depending on model, configuration and quantity. Send the model number and quantity for a quote.
Conclusion
Choose in this order: confirm the lift height, read the allowable load at that exact length, step up a cross-section or to a B version when the rating is short, and check weight and transport length against the site. The full range — LBNX, LBD and LBR lattice gin poles from □250 to □600 — is listed on the Gin Poles page, with a parameter table for every model. Tell us your tallest lift and your heaviest piece, and we will confirm the model and quote it for your project: sales@staging.huailitepower.com, or WhatsApp +86 13049969968.
