Machines for building transformers and switchgear: busbar processing, winding, and cutting.
12 products · No public prices — request a quote.
Huailite Power supplies manufacturing machines for manufacturers building transformers and switchgear in the Middle East, Africa, and South America: busbar processing, winding, and laser cutting machines. Browse by category below, or send your machine list and project details for a quote.
These machines are bought by the product they make, so start with the work: busbar processing, winding, or cutting and forming. For busbar work, the three numbers that matter are punching force, maximum thickness, and maximum width. The CNC three-in-one machines cover the middle of the range: the MX-303BSSK (300 kN punching, 500 kN cutting, 500 kN bending) and the MX-503BSSK (500 kN punching, 800 kN cutting, 600 kN bending) both process busbar up to 16 mm thick, at 160 mm and 260 mm wide respectively, with bending precision of 1° and repeat bending precision of 0.2°. The MX-303KSSK matches the MX-303BSSK at 300 kN punching and 16 mm by 160 mm, in an open bending unit instead of a closed one. At the heavy end, the MX703 and MX902 punch at 600 kN, process busbar up to 16 mm thick and 200 mm wide, and weigh 6000 kg.
For small busbar jobs, the combination machine punches, cuts, and flat-bends copper and aluminium busbar of 150×10 mm, and vertical-bends 125×10 mm, at 170 kg on a single-phase 220 V, 50 Hz supply. The CNC servo positioning machine adds servo positioning accuracy of ±0.2 mm over a 0–800 mm positioning length, for work where the bend position has to repeat exactly. Choose the machine by the widest and thickest busbar in the job, not by the average — a 200 mm busbar needs the MX703 or MX902, and a 260 mm busbar needs the MX-503BSSK.
Winding machines are chosen by capacity. The transformer winding machines run from the RX-1 (0.5 T, 500 kg capacity, 0–180 r/min) through the RX-2 (1 T, 1000 kg, 0–100 r/min), RX-3 (2 T, 2000 kg, 0–80 r/min), and RX-03 (3000 kg, 0–50 r/min) to the RX-05 (5000 kg, 0–30 r/min) — heavier coils turn slower, so match the capacity to the largest coil and check the speed at that capacity. The foil winding machines (BRJ series) wind copper foil of 0.5–2 mm and aluminium foil of 0.5–3 mm.
For cutting and forming, the RRD-GJ-1530 fibre laser cutter runs at 1500 W over a 3000×1500 mm cutting area, with positioning accuracy of ±0.03 mm, a cutting speed of 0–48 m/min, and water cooling. The RSG-MX1030 heat shrink tube forming machine works over a temperature range up to RT+250 °C, reaching temperature in 30 minutes or less, with temperature accuracy of ±1 °C and uniformity of ±5 °C, and a conveyor speed of 0.5–2 m/min. Send the busbar size, the coil weight, or the sheet size, and we will match the machine to the work.
| Model | Punching force | Max thickness | Max width | Weight |
|---|---|---|---|---|
| MX-303BSSK | 300 kN | 16 mm | 160 mm | 1450 kg |
| MX-503BSSK | 500 kN | 16 mm | 260 mm | 1800 kg |
| MX-303KSSK | 300 kN | 16 mm | 160 mm | 1500 kg |
| MX703 | 600 kN | 16 mm | 200 mm | 6000 kg |
| MX902 | 600 kN | 16 mm | 200 mm | 6000 kg |
Which busbar machine handles a 200 mm wide busbar?
The MX703 and MX902 (600 kN punching, 16 mm thick, 200 mm wide, 6000 kg). For 260 mm wide busbar, the MX-503BSSK (500 kN, 16 mm, 260 mm, 1800 kg); for 160 mm, the MX-303BSSK or MX-303KSSK (300 kN, 16 mm, 160 mm).
What busbar thickness can the machines process?
Up to 16 mm across the CNC range (MX-303BSSK, MX-503BSSK, MX-303KSSK, MX703, MX902). The combination machine processes 150×10 mm copper and aluminium busbar for punching, cutting, and flat bending, and 125×10 mm for vertical bending.
What can the foil winding machine handle?
The BRJ series winds copper foil of 0.5–2 mm and aluminium foil of 0.5–3 mm.
What transformer winding capacity is available?
From the RX-1 (0.5 T, 500 kg, 0–180 r/min) through the RX-2 (1 T, 1000 kg), RX-3 (2 T, 2000 kg), and RX-03 (3000 kg) to the RX-05 (5000 kg, 0–30 r/min).
What is the laser cutter’s working area and accuracy?
The RRD-GJ-1530 fibre laser cutter: 1500 W, cutting area 3000×1500 mm, positioning accuracy ±0.03 mm, cutting speed 0–48 m/min, water cooling.
Browse by category, then request a quote for your project.

Busbar, winding, and laser cutting machines.
12 products
Busbar Processing Machines · Foil Winding Machines · Transformer Winding Machines · Heat Shrink Tube Forming Machines · Fiber Laser Cutting Machines
Send the item, model and quantity. We will quote per your project.
Huailite Power · Shenzhen, China
sales@staging.huailitepower.com · +86 13049969968 · WhatsApp
Home · Products · About Us · Contact Us