Hydraulic press tools, cutters, and safety equipment for live line and substation work.
53 products · No public prices — request a quote.
Huailite Power supplies hydraulic and safety tools for utilities and EPC contractors in the Middle East, Africa, and South America: hydraulic press tools, cutters, safety belts, harnesses, and grounding equipment for live line and substation work. Browse by category below, or send your tool list and project details for a quote.
Start with the crimping force, and match it to the terminal size. For copper terminals up to 300 mm², the 60 kN tools are enough: the HCTX-300 (Cu 50–300 mm²) and the HZ-300 (Cu 16–300 mm²), or the 120 kN CPO-300 (Cu 16–300 mm²). For copper terminals up to 400 mm², step up to 120–130 kN: the CYO-410 (120 kN, Cu 50–400 mm²), CYO-510B and CPO-400 (both 130 kN, Cu 50–400 mm²), HCTX-400 (120 kN, Cu 50–400 mm²), and HZ-400 (120 kN, Cu 16–400 mm²). Aluminium terminals need less force: the same tools cover aluminium up to 300 mm², or 240 mm² on the 60 kN HCTX-300 and HZ-300. For the largest terminals, use split-type tools: the CO-400 (200 kN, 16–400 mm²), CO-630A (350 kN, 150–630 mm²), CO-630B (300 kN, 150–630 mm²), and CO-1000 (550 kN, 400–1000 mm²). For conductor and earth-wire compression, the YJD series runs from the YJD-600 at 60 T to the YJD-3000 at 300 T.
Next, choose the drive. Manual press tools (CYO, CPO, HCTX, HZ) need no power and suit site work; battery tools (EZ400 at 120 kN for 16–400 mm², EZ300 at 60 kN for 16–300 mm², both 18 V) are faster where many crimps are needed in a row; split-type tools need a pump. All of our pumps work at 70 MPa: hand and foot pumps (CP-700, CP-180, CFP-800B) and the electric pump ZCB6-5, which is the listed match for the CH-60 and CH-70 hydraulic punchers (ZCB6-5-A3) and the CH-80 and CH-100 (ZCB6-5-AB). Punchers run from the CH-60 (95 mm throat, iron 6 mm / copper 10 mm) to the CH-100 (135 mm throat, iron 18 mm / copper 20 mm), and torque wrenches from the B3-3 (72–200 N·m) to the BX4-3 (120–300 N·m).
Cutting and stripping follow the same rule: match the tool to the cable. The EC105 cuts armoured cable up to 105 mm diameter, the J-100, J-130, and J-160 ratchet cutters cut up to 100, 130, and 160 mm, and the battery cutters EC-40 and EC-85 cut armoured cable up to 40 and 85 mm. Wire strippers LX1, LX2, and LX3 strip LGJ240–400, LGJ500–720, and LGJ900–1120 respectively, so the conductor size decides the model.
Safety equipment is chosen by voltage and by load. The 23001 grounding set is rated 10–500 kV, with copper wire of 25, 35, or 50 mm² and an operating rod total length of 1000–5500 mm. Personal grounding wires are the 23021 (three-phase, 16 mm²) and the 23031 (single-phase, 25 mm², 3 m), and short-circuit grounding wires are the 23041–23044 (16, 25, 35, and 50 mm²). The rope safety belt is rated at a 100 kg load, the LGS ladder carries 150 kg, and the 22250 insulation rope ladder uses Φ12×300 mm rungs and can be made to a custom length. Send the terminal size, cable diameter, and voltage level, and we will match the press tool, cutter, pump, and grounding set as one kit.
| Model | Crimping force | Copper terminals | Aluminium terminals |
|---|---|---|---|
| CYO-410 | 120 kN | 50–400 mm² | 35–300 mm² |
| CYO-510B | 130 kN | 50–400 mm² | 35–300 mm² |
| CPO-300 | 120 kN | 16–300 mm² | 10–240 mm² |
| CPO-400 | 130 kN | 50–400 mm² | 35–300 mm² |
| HCTX-300 | 60 kN | 50–300 mm² | 35–240 mm² |
| HCTX-400 | 120 kN | 50–400 mm² | 35–300 mm² |
| HZ-300 | 60 kN | 16–300 mm² | 10–240 mm² |
| HZ-400 | 120 kN | 16–400 mm² | 10–300 mm² |
Which press tool do I need for 400 mm² copper terminals?
Use a 120–130 kN tool: the CYO-510B and CPO-400 (both 130 kN, Cu 50–400 mm²) or the CYO-410, HCTX-400, and HZ-400 (all 120 kN, Cu 50–400 mm², or 16–400 mm² on the HZ-400). For 300 mm² and below, the 60 kN HCTX-300 or HZ-300 is enough, or the 120 kN CPO-300.
Should I choose a manual, battery, or split-type press tool?
Manual tools (CYO, CPO, HCTX, HZ) need no power and suit site work. Battery tools (EZ400 at 120 kN, EZ300 at 60 kN, both 18 V) are faster for repeated crimps. Split-type tools (CO-400 to CO-1000, 200–550 kN) cover 16–1000 mm² and need a 70 MPa pump, and the YJD series (60–300 T) is for conductor and earth-wire compression.
Which cutter handles armoured cable?
The EC105 battery cutter cuts armoured cable up to 105 mm diameter. The J-100, J-130, and J-160 ratchet cutters cut armoured cable up to 100, 130, and 160 mm, and the battery cutters EC-40 and EC-85 cut armoured cable up to 40 and 85 mm.
What voltage is the 23001 grounding set rated for?
10–500 kV, with copper wire of 25, 35, or 50 mm² and an operating rod total length of 1000–5500 mm. For personal protection, the 23021 is a three-phase grounding wire (16 mm²) and the 23031 is a single-phase grounding wire (25 mm², 3 m); short-circuit grounding wires 23041–23044 cover 16, 25, 35, and 50 mm².
What load are the safety harnesses and ladders rated for?
The rope safety belt is rated at a 100 kg load, and the LGS ladder carries 150 kg. The 22250 insulation rope ladder uses Φ12×300 mm rungs and can be made to a custom length.
Browse by category, then request a quote for your project.


Send the item, model and quantity. We will quote per your project.
Huailite Power · Shenzhen, China
sales@staging.huailitepower.com · +86 13049969968 · WhatsApp
Home · Products · About Us · Contact Us