Puller and Tensioner Use Guide

Puller and Tensioner Use Guide

Short answer

Use a Double Drum Hoist Winch for tower line, traction line, and tight line work, and use a Conveyor Cable Pulling Machine for long distance cable laying in urban power network work. Check pull force, speed, cable diameter, and power before you choose.

When to use a hoist winch

The Double Drum Hoist Winch JJCS-50 is listed for the construction of the tower line, traction line, tight line operation, and laying cable.

Key specs — JJCS-50, Item 09162A:

  • Engine: Diesel Engine, Power 9 kW, Speed 2000 rpm
  • Pull Slow: 50/5, Moderate: 25/9 14/14, Fast: 8/22, Reverse: -/5 -/9
  • Drum bottom of groove diameter: Ø230mm
  • Outline size: 1000x670x600mm
  • Weight: 300 kg
  • Note in source: Power can be configured according to the requirements.

A gasoline engine version JJQS-50, Item 09162B, is listed with the same 9 kW power and 3600 rpm speed. Check the exact Item Number before ordering.

Link: See Double Drum Hoist Winch – JJCS-50 in Pullers & Tensioners.

When to use a conveyor pulling machine

The Conveyor Cable Pulling Machine DSJ-5 is listed for urban power network reconstruction and new laying of cables, especially suitable for long distance cable release, reducing labor intensity and improving the quality of the project.

Key specs — DSJ-5, Item 21103:

  • Motor Power: 1.1×2 kW
  • Clamping force: ≤2.7 kN
  • Pull Force: 7 kN
  • Conveying speed: 9 m/min
  • Outline size: 950x500x400mm
  • Diameter of cable: 30-180mm
  • Supply Voltage: 380V
  • Weight: 150 kg

The source also notes the thrust of the machine is large and small, easy to be put into the construction of the well, and its weight is light. The machine can be pushed by a single machine, and can also be connected in series with a machine, and the synchronization of several machines is controlled by a control box. The conveyor wheel is made of rubber die casting, which will not damage the cable sheath, and adjust the center distance according to the external diameter of the cable.

A larger version DSJ-8, Item 21105, is listed with pull force 9 kN, conveying speed 6 m/min, cable diameter 30-200mm, and weight 195 kg.

Link: See Conveyor Cable Pulling Machine – DSJ-5 in Pullers & Tensioners.

Key specs to check

1. Pull force in kN: 50/25/8 for the winch at different speeds, 7 kN for DSJ-5.

2. Speed in m/min: check slow, moderate, and fast for the winch, and conveying speed for the pulling machine.

3. Cable diameter in mm: 30-180mm for DSJ-5, 30-200mm for DSJ-8.

4. Power: diesel or gasoline engine for the winch, 380V supply for the pulling machine.

5. Weight and outline size for transport and site access.

ModelTypePull forceSpeedCable / usePowerWeight
JJCS-50Double drum hoist winchSlow 50 kN, Moderate 25 kN, Fast 8 kNSlow 5, Moderate 9, Fast 22 m/minTower line, traction line, tight line, cable layingDiesel 9 kW, 2000 rpm300 kg
JJQS-50Double drum hoist winch (gasoline)Slow 50 kN, Moderate 25 kN, Fast 8 kNSlow 5, Moderate 9, Fast 22 m/minSame as JJCS-50Gasoline 9 kW, 3600 rpm300 kg
DSJ-5Conveyor cable pulling machine7 kN (clamping force up to 2.7 kN)9 m/minCable 30–180 mm, long distance1.1×2 kW, 380 V150 kg
DSJ-8Conveyor cable pulling machine9 kN6 m/minCable 30–200 mm195 kg

FAQ

Can the winch power be changed?

Yes, the source note says power can be configured according to the requirements. Confirm the exact model and Item Number before ordering.

Is the pulling machine suitable for long distance cable release?

Yes, the source application notes say it is especially suitable for long distance cable release.

Where do I ask for a quote?

Use Request Quote on the product page or Contact Us. Include the Item Number and Model, for example 09162A / JJCS-50 or 21103 / DSJ-5.

Next step

If you have the line type, pull force, and cable diameter, start from the tables above, then check the product pages in Pullers & Tensioners. For a quote, contact Huailite Power: sales@staging.huailitepower.com, +86 13049969968, WhatsApp +86 13049969968.